Kristech Services Ltd.

Stone, glass and woodworking machinery


Kristech Services Ltd. © April 2000

Sales & Service

No longer offering this product

Home

200C Membrane Press

Back

MOULDING AIR PRESS "P/A 200

The moulding press is used to cover shaped panels with thermoplastic sheets (PVC).
Press structure in thick milled steel plates without welding
The bottom mobile platen, heated by electric resistors, is driven by a group of racks acting along the platen width and length and granting a perfect parallelism during platen rise/fall.
Equipped with extractable aluminium tray to facilitate manual loading/unloading.
Heating of pressurising air by means of electric exchanger; the air heating circuit has been conceived to ensure a even heating on the total surface for a perfect final result.
Vacuum device equipped with high power pump for immediate air vacuum.
Special structure consisting of a rubber membrane fixed to the top platen of the press, made of special highly deformable, heat resistant material.
Thanks to a special degassing system, it allows the application of:
- PVC
- Veneer

OPTIONAL :

MANUAL CUTTER FOR PVC CUT

BARS DIVIDING THE LOADING TRAY IN TWO PARTS,
TO ENABLE THE PARTIAL USE OF THE TRAY

DOUBLE TRAY FOR LOADING & UNLOADING


FLEXA 1 (ONE SIDE WORKING, PVC AND VENEER)
FLEXA 1 - 25/14
FLEXA 1 - 30/14

FLEXA 2 (TWO SIDES WORKING, PVC AND VENEER)
FLEXA 2 - 25/14
FLEXA 2 - 30/14

The moulding press is used to cover shaped panels with thermoplastic sheets (PVC) from one side and/or veneer from one or two sides.
Press structure profile welded beams, is suitable to bear the high pressures required by this kind of processing.

Special structure consisting of a rubber membrane fixed to the top platen of the press, made of special highly deformable, heat resistant material.
Thanks to a special degassing system, it allows the application of:
- PVC
- Veneer

OPTIONAL

- Manual cutter for PVC cut

- Loading/unloading tray

- Double loading/unloading tray


SEMI-AUTOMATIC VACUUM PRESS “VACUAR 25”

Double loading station press, to coat raised panels with PVC.
Working system: VACUUM (980 millibar).

- PVC roll supports with manual shear, placed at the two opposite ends of the press
- working dimensions mm 2500 x 1400
- n.1 bar dividing the tray included in standard equipment
- trays with aluminum sheets 5mm thick
- aluminum profiles around the perimeter
- n.43 lamps ensuring a very good and uniform heat distribution
- inspection windows and inside lighting
- standard depth of the tray 45mm with option of depth 60mm enabling the production of doors
- machine functions controlled by PLC enabling to work with different times between tray A and tray B, to work different thickness of PVC
- cycle is controlled with solenoid valves, without switches and manual interventions


MOULDING AIR PRESS " VAMP "

VAMP 25/14

VAMP 30/14

The main purpose of the air press is the covering of raised panels, normally made by MDF, with PVC foils, to produce for instance kitchen doors or similar items.

Our models can also be equipped on request with an easily extractable top air membrane (optional), allowing to apply veneer (thickness 0,4 mm) on raised or flat panels.
VAMP is different from other models as it can be equipped on request with two loading/unloading trays that are alternatively introduced and extracted from the two sides of the press by a motorized system.

This system allows to prepare on one of the two trays the new material during the pressing cycle of the other tray inside the press.
In the same way the trimming of the foil edges is done during the pressing of the other material inside the press.
In this way the dead times are minimized.

The “touch-screen” panel allows to program and visualize in real time the pressing time and the temperatures

MACHINE COMPLETE WITH:

- Motorized tray for loading/unloading
- Touch – Screen control panel

OPTIONAL :

SECOND TRAY FOR LOADING/UNLOADING AT THE OTHER SIDE OF THE PRESS

FRAME WITH MEMBRANE

MODULAR TEMPLATE “ PIN SYSTEM”

SUPPORT FOR PVC ROLL WITH MANUAL SHEAR

SUPPORT FOR PVC ROLL WITH PNEUMATIC SHEAR

BAR DIVIDING THE LOADING TRAY IN TWO PARTS,
TO ENABLE THE PARTIAL USE OF THE TRAY

ANTISTATIC BRUSH


MOULDING AIR PRESS "PAR"

PAR 220

PAR 320

The main purpose of the air press is the covering of raised panels (normally made by MDF) by PVC foils, to produce for instance kitchen doors or similar items.

Our models are also equipped with an easily extractable air membrane, that allows veneering operations on raised or flat panels.

PAR is different from the other models as it is equipped with two end-loading overlapped trays that are alternatively introduced in the press, by a motorized system.

This system allows the new material on one of the two trays to be prepare    during the pressing cycle of the other one in the press.
In the same way the trimming of the foils edges is done during the pressing

cycle of the other material in the press.
In this way the dead times are minimized.

The “touch-screen” panel allows the program and visualize in real time

the pressing time and the temperatures

MACHINE COMPLETE WITH:
- Double support for PVC coils
- Manual shear for PVC foil
- Double motorized tray loading /an loading unit
- Frame with membrane
- Touch – Screen control panel

OPTIONAL :

PNEUMATIC CUTTING SYSTEM FOR PVC FOIL

BARS DIVIDING THE LOADING TRAY IN TWO PARTS,TO ENABLE THE
PARTIAL USE OF THE TRAY.

MODULAR TEMPLATE “ PIN SYSTEM”